Print proof, interior file
Rejected IngramSpark File Fix
Your IngramSpark file rejected message names a problem but not the page, the font or the setting behind it. We open the interior PDF, find the cause, correct it at the source and recheck the result against the file rules before you upload again.
Quick overview
What clearing IngramSpark preflight errors really means
IngramSpark preflight errors come from an automated check on your uploaded PDF, and the message tells you the category, not the repair. A missing font, a layer of live transparency, an RGB picture or a page size a few points off can each produce the same stalled title.
We work like a prepress operator. We reproduce the problem on your file, change its cause in the layout or the export, then open the result the way the checker will. You receive a corrected interior PDF and a short note of what was wrong.
What this repair covers
- The interior PDF, not the cover
- Fonts, transparency, colour, page size, marks
- One fixed price by length or image count
- No promise that IngramSpark will accept it
When you need it
How to fix IngramSpark PDF problems: six signs you should hand it over
Most authors try a re-export or two first. These are the moments when a third attempt costs more time than a repair.
The same message returns
You uploaded again and IngramSpark answered that the revised submission did not fix all issues. Something else is still wrong in the file.
Word cannot make the format
Your writing tool offers no PDF/X export, so every save is a plain PDF and the standard IngramSpark recommends stays out of reach.
Characters show as boxes
Pasted symbols, odd quotes or a dingbat font left glyph gaps. They are easy to see once found and hard to find across 300 pages.
The file is called corrupt
A bad font, a damaged image or even an ampersand in the file name can trigger that label. The cause is rarely where it looks.
Pictures upset the check
Low-resolution images, RGB colour in a print file or a complex image flagged for flattening need picture-by-picture attention.
A print date is fixed
A launch, an event or a stocked order depends on the title clearing processing, and each failed round costs you days.
Have the exact wording of the message? Paste it into a quote request and we start from there.
Send the message textWhat we do
What we do about IngramSpark font errors and the other rejections
- Read the message and the fileWe match IngramSpark's wording to the PDF and run a compliance check against the PDF/X-1a profile to see every font and object it objects to.
- Find the real causeA font flagged as not embedded may hide a missing glyph from pasted text. We look at both before changing anything.
- Repair at the sourceWhere your layout file exists we correct it there and export again. Where only a PDF exists we use preflight tools on the PDF itself.
- Recheck like the checkerWe reopen the new PDF, confirm every font shows as embedded, page through it and confirm page size, colour and marks.
What is included
What is included when we clear an IngramSpark transparency error
The same repair pass applies whichever message you received. Every price below includes these six items.
Cause named plainly
You hear what was wrong in words, such as which font, which page range or which object, not a list of settings.
Transparency and colour handled
Live transparency is flattened and RGB objects are converted, within what the source allows.
Fonts embedded
Every font in the corrected PDF is checked in the document properties and shown as embedded.
Page setup confirmed
Page size against your trim size, single pages rather than spreads, and no crop or registration marks.
Full page-through
We read the repaired file front to back, because errors can sit on one page only.
A short repair note
A plain summary you can keep next to the project, so the next export starts from known settings.
Pick a fixed price for your ingramspark rejected interior
Tell us how long the book is, which message IngramSpark returned and what file you still have. The fixed price and a delivery estimate update with each choice, and nothing starts until you place the order.
Ask for a price on a bigger book
Send the validation message and the page count. You get a fixed price and a real delivery date back, and nothing starts until you agree.
- Send the details once
- We reply with a fixed price
- Nothing starts until you agree
Prices are in US dollars and cover correcting and rechecking the interior file described. The cover file, ISBN purchase and licensed fonts or images are not included unless you add them. We cannot promise that IngramSpark will accept a file. Prices are an unverified estimate until the owner confirms them.
Add-ons
Extras that suit a rejected title
These are the same six extras offered in the order builder above, shown here so you can plan the whole job.
Written preflight report
One page on what was found, where and what changed. $69.
Resubmission walk-through
We sit with you through the upload and read the new result together. $59.
Cover file check
The cover is compared with a template built for your trim size and page count. $99.
Contents rebuild
Contents entries and page numbers follow the corrected layout. $79.
Matching Amazon print file
A second PDF to Amazon's print rules from the same layout. $109.
Trim size change
The interior is re-flowed to a new size with margins reset. $119.
Turnaround and what we need
How long it takes and what to send
The estimate in your order summary comes from the size you choose, from about one to two working days for the shortest books to about four to six for the longest. Express and Priority move you ahead of the regular queue. These are planning estimates, and we confirm a date before you pay.
The more of the original you can send, the more we can change at the source instead of patching a finished PDF.
Please send
- The exact IngramSpark message, copied from your title page
- The PDF that was rejected
- The layout or Word file, if you still have it
- Trim size and page count from your title setup
- Fonts that are not freely available, or their licence
Proof
Before and after, once we have real ones
Reserved slot
Reserve this card for a real validation message beside the same PDF after repair.
Reserved slot
Reserve this card for a font properties window showing every font embedded.
Reserved slot
Reserve this card for a client note about a title that cleared processing.
Related tasks
Other file jobs authors bring us
Pre-upload file review
A read-through of an interior PDF before you submit it anywhere.
Amazon print rejection
A different checker with its own margin and bleed messages.
Spine and cover correction
Rebuilding a cover to a new page count and paper.
EPUB validation errors
Ebook files that fail a store checker rather than a print one.
Resize to a new trim
Moving a finished interior to a different book size.
Large-print edition
A second interior with bigger type and reset margins.
FAQ
Questions about rejected files
What is an IngramSpark cover error, and does this repair fix it?
IngramSpark uses wording such as "Cover Layout Submitted is Not Built to the Correct Specifications" when the cover is the wrong size or does not match the title's trim size, bind type, interior type or page count. This package repairs the interior. The cover file check extra covers the cover.
Can you do an IngramSpark PDF/X-1a fix if Word cannot export it?
Yes. IngramSpark recommends PDF/X-1a (2001) or PDF/X-3 (2002). When your tool has no such export, we rebuild the page setup and convert the PDF with preflight tools, then check that fonts, colour and transparency pass.
What should I do when my IngramSpark file failed twice?
Do not upload a third time yet. IngramSpark's own message "Revised Interior/Cover Submission Did Not Fix All Issues" means other problems remain. Send us the PDF and both messages; we check the whole file rather than one error at a time.
How do I do an IngramSpark resubmit once the file is fixed?
Upload the corrected interior in the interior slot and a corrected cover in the cover slot of your title's file upload page, since files placed in the wrong slot are rejected on their own. IngramSpark's current help says replacing a file and revalidating costs nothing, and charges apply only after eProof approval. Older articles differ, so read the notice in your account first.
How much does it cost to fix a rejected IngramSpark file?
Interior repairs run from $79 for a short text book to $419 for a picture-led book of up to 150 images, with larger books quoted. The price follows words or images, then the type of message, your source file and the speed you pick.
Can you guarantee IngramSpark will accept the repaired file?
No. We can show that the file meets the published rules and passes our checks, but IngramSpark runs its own review and may raise a new message. If it does, that new message is where we continue.
Care plan
File Review and Fixes Care Plan Monthly
For publishers with several titles, a monthly plan covers re-exports, small corrections and file review as new editions come in. Quoted by the month once we know your catalogue.
Send us your rejected IngramSpark file fix
Tell us the message, the page count and what file you have. We reply with a fixed price and a delivery date for the rejected IngramSpark file fix, and nothing starts until you agree.